Table of Contents
Advertisement
Figure 3-21 ParaniUpdater Window
3.11. Terminal Program
A terminal program is typically an application that will enable a PC to communicate directly with a modem.
If you are using Windows 98SE or higher version of Windows, HyperTerminal program is included as
part of the operating system. Parani-ESD provides some extended AT commands for configuration of
the Parani-ESD.
This manual will explain the method using HyperTerminal. If you need to install HyperTerminal, click
start>setting>control panel>add/remove programs. For more precise details on HyperTerminal
installations, please refer to Microsoft Windows Help section.
Attach Parani-ESD to serial port of host computer and power on the unit.
Launch HyperTerminal. It can be found in start menu >programs >accessories >communication
>HyperTerminal. Select the Serial port that Parani-ESD will be connected to.
Input the same settings into Serial port configuration window as Parani-ESD settings.
Select the Serial port setting in the window displayed, please make sure the serial settings in
Hyperterminal are set to the same settings as the Parani-ESD's serial settings.
Figure 3-22 HyperTerminal
26
Advertisement
Table of Contents
