Table of Contents
Advertisement
Serial port settings can be changed by <Start Configuration> and <ParaniWIN Configuration> of
ParaniWIN in the menu bar at upper left corner of the window without re-running the ParaniWIN program.
Figure 3-4 Menu Bar at Upper Left corner of ParaniWIN
When the ParaniWin software is able to access the Parani-ESD properly, the icons in the left side
window come will become available for use.
In device configuration window, hardware reset can be executed or operation mode and RS232 can be
configured as well. Security option also can be configured in this window.
Figure 3-5 Device Setting Window
Parani-ESD supports two security options, Authentication and Encryption. If you check the
Authentication option, you must also enter the Pin Code value. If the authentication is activated, the
connection, only between the Master and Slave device that share the same Pin Code, is established.
Parani-ESD supports two security options, Authentication and Encryption. If you enable the
Authentication option, you must also enter a Pin Code value. If the authentication is enabled, the
16
Advertisement
Table of Contents
