Software And Utility; Paraniwin - Sena Parani-ESD100 User Manual

Example of remote configuration mode.
CONNECT 000195000001
+++
Please Enter Password
AT+PASS=0000
Remote Configuration Enabled
AT+BTINFO?
000195000001,SD1000v2.0.3-095515,MODE0,CONNECT,0,0,HWFC

3.6. Software and Utility

This configuration software and utility for firmware update is included with the product, which also can
be downloaded from http://www.senanetworks.com
Software

ParaniWIN

ParaniWizard
ParaniMultiWizard
ParaniUpdater
3.7. ParaniWIN
ParaniWIN is a program that runs on Microsoft Windows for the configuration of Parani-ESD. Install
ParaniWIN on your computer. Plug a Parani-ESD into the serial port of the computer and turn on the
power. Run ParaniWIN.
Set each option properly and click [Confirm]. If the settings of the Parani-ESD are different from the
ParaniWin, an error message will pop up. If the Parani-ESD is in the status of connection, warning
message will pop up. Then the current connection can be cancelled by [Disconnect] button on the main
window.
Table 3-3 Configuration Software
Purpose
Configuration
Pairing Configuration
Multi Configuration
Firmware Update
Figure 3-1 Serial Port Setting
Operating System
MS Windows 98SE or Higher
MS Windows 98SE or Higher
MS Windows 98SE or Higher
MS Windows 98SE or Higher
14