Sena Parani-ESD100 User Manual page 18

Figure 3-7 Signal Strength Test
The signal strength test shows LInkQuality and RSSI values. The closer LinkQuality is to 255 and RSSI
is to 0, this means the Parani-ESD has a good connection to the connected Bluetooth device. In general,
the wireless connectivity is at its best within 10 meters. You can push the STOP button at anytime in
order to terminate the signal strength test. The signal strength test will continue until the STOP button is
pushed. If you close the ParaniWIN Window without pushing the STOP button, you must restart Parani-
ESD to terminate the test.
Connection(in) icon will show the following window, which enables the Parani-ESD to wait for a
connection from another Bluetooth device. If the waiting time is set to 0, Parani-ESD will continually wait
for connection until [Cancel] button is clicked.
18