Table of Contents
Advertisement
Figure 3-1: Front Panel of the Oscilloscope
Description:
1. CH1 and CH2 input connectors.
2. Waveform generator output connector (optional).
3. Display area.
4. The F1 - F4 keys are multi-function keys. In each menu mode, press the
corresponding key to select the corresponding menu item.
5. After pressing the HOR key, through the key
horizontal time base setting, and observe the change of the state
information caused by it; it can also be found that the horizontal time
base display corresponding to the status bar has changed correspondingly;
the horizontal displacement of the signal in the waveform window can be
adjusted by pressing
6. Return key. Press this key to return to the previous menu; when the menu
1
17
16
15
14
13
12
.
, you can change the
6
2
3
4
5
6
7
8
9
10
11
Advertisement
Table of Contents
