How To Implement The General Inspection - Owon DSO-2072H Quick Start Manual

◼ Avoid exposed circuit. Be careful when working on exposed circuitry to
avoid risk of electric shock or other injury.
◼ Do not operate if any damage. If you suspect damage to the instrument,
have it inspected by qualified service personnel before further use.
◼ Do not operate in damp conditions.
◼ Do not operate in an explosive atmosphere.
◼ Keep product surfaces clean and dry.
◼ Using the equipment not in accordance with the method specified
by the manufacturer may damage the protection provided by the
equipment.

2. How to Implement the General Inspection

After you get a new oscilloscope, it is recommended that you should
make a check on the instrument according to the following steps:
1. Check whether there is any damage caused by transportation.
If it is found that the packaging carton or the foamed plastic protection
cushion has suffered serious damage, do not throw it away first till the
complete device and its accessories succeed in the electrical and
mechanical property tests.
2. Check the Accessories
The supplied accessories have been already described in the "
List of Accessories
loss of accessories with reference to this description. If it is found that
there is any accessory lost or damaged, please get in touch with our
distributor responsible for this service or our local offices.
3. Check the Complete Instrument
If it is found that there is damage to the appearance of the instrument, or the
instrument can not work normally, or fails in the performance test, please get in
touch with our distributor responsible for this business or our local offices. If
there is damage to the instrument caused by the transportation, please keep
the package. With the transportation department or our distributor responsible
for this business informed about it, a repairing or replacement of the instrument
will be arranged by us.
" of this Manual. You can check whether there is any
4
Appendix A: