Table of Contents
Advertisement
Scouting Camera SG565FV
The following shows how to set PIR sensitivity as Low provided that the
previous option is Normal.
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Sense Level.
Press RIGHT to select Low.
c)
Press OK to save the current setting and the option will be un-highlighted.
d)
Press MENU to cancel setting and return to info display.
4.1.11 Set Date and Time Stamp
The following shows how to set time stamp as Off provided that the previous
option is On.
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Time Stamp.
Press RIGHT to select Off.
c)
Press OK to save the current setting and the option will be un-highlighted.
d)
Press MENU to cancel setting and return to info display.
4.1.12 Set Timer
This parameter defines a certain time lapse in a day when the Camera can be
triggered. In the rest of the time the device is shut off. The effective value of the hour
ranges from 0 to 23 while the minute ranges from 0 to 59.
Please note that the start and stop time can only be effective when the timer is set
as On. Provided that the camera should work from eight a.m. to five p.m., the steps
are as following:
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Timer Switch.
c) Press RIGHT to select On.
d) Press OK to enter into submenu.
e) Press RIGHT to select item, press UP or DOWN to change the value until the
start time changes to 8 and the stop time changes to 17.
f) Press OK to save all current setting and the option will be un-highlighted.
Press MENU to return to previous menu.
4.1.13 Reset to Default Settings
To reset the setting to the default values, the steps are as follows:
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Reset.
c) Press OK to reset to default settings and return to info display.
Press MENU to cancel setting and return to info display.
4.1.14 View Image or Video
a) Switch to TEST mode and enter into info display.
b) Press OK to view the latest picture (or video) in LCD screen on camera, TV
monitor or Image viewer with TV-in connector.
c) Press NEXT to start playing the video clip in TV monitor. NOTE: Video clip
cannot be played in LCD screen on the control.
4 Advanced Operations
Page
12
Advertisement
Table of Contents
