Selecting The Call Tone; Busy Channel Lockout - Uniden UH5060VP Owner's Manual

Operation

Selecting the Call tone

1. Press [MENU/ENTER] three times.
The call tone setting flashes.
2. Press /
setting between 1, 2, 3, 4 and 5.
3. Press [MENU/ENTER] to store the setting.
4. Press and hold [MENU/ENTER] to save
& exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB
Radio will automatically exit the Menu Mode.
NOTE

Busy Channel Lockout

If the channel is already in use, you can prevent the UHF CB Radio
from transmitting . This is particularly important when using CTCSS/DCS.
1. Press [MENU/ENTER] four times.
The BCL setting flashes.
2. Press /
setting between ON or OFF.
3. Press [MENU/ENTER] to store the setting.
4. Press and hold [MENU/ENTER] to save &
exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB
Radio will automatically exit the Menu Mode.
NOTE
UNIDEN UH5060
to change the
to change the
21
UHF CB Transceiver