Operating The Uhf Cb Radio In Duplex Mode; Scanning - Uniden UH8055S Owner's Manual

Operation

Operating the UHF CB Radio in Duplex Mode

For this example we are adopting CH01 as the
channel being used in your area for repeater use.
1. Press [MENU] on the base. The duplex
setting flashes.
2. Turn the Rotary Channel Selector on the
base to change the setting between ON or
OFF (standard channel numbering).
3. Press and hold [MENU] to save & exit from
the menu mode.
DUP icon displays when a selected channel is set to Duplex mode.
• Only channels 01 - 08, and channels 41 - 48 are available for Duplex.
• Check with your local Retailer for information on available repeaters.
• If a button is not pressed within 10 seconds the UHF CB Radio will
NOTE
automatically exit the Menu Mode.

Scanning

The UH8055S' Scanning feature allows you to search for active channels automatically.
There are 3 scanning modes;
Open Scan (OS),
Group Scan (GS) and
Master Scan (M.SCN) (a special case of Group Scan).
During SCAN the UH8055S only checks channels or frequencies that are in the SCAN
Memory, which are indicated by the M (memory) icon. The UH8055S maintains two
SCAN Memories; one for Open Scan (OS) mode and the other for Group Scan (GS
mode, to give you flexibility and allow you to use the radio more effectively.
Group Scan and Master Scan modes share the same SCAN Memory.
NOTE
Furthermore, any combination of the three channel groups can be scanned by pressing
[POLICE] during scan to select the desired channel groups.
1. Press [SCAN] to start Scanning.
2. The SCAN icon appears.
3. The scan direction can be changed at any time by rotating the Channel knob on the
base.
4. Press [SCAN] to stop Scanning.
UNIDEN UH8055S 24 UHF CB Transceiver