Operation
Operating the UHF CB Transceiver in Duplex Mode
For this example we are adopting CH01 as the channel being used in your area for
repeater use.
1. Press [MENU/ENTER]. The duplex setting flashes.
2. Turn the Rotary Channel Selector at the base or press
SPK/MIC to change the setting between ON (" r " for repeater channels 01 - 08 or
" n " for repeater channels 41 - 48) or OFF.
3. Press [MENU/ENTER] to
store the setting.
4. Press and hold
[MENU/ENTER] to exit
from the menu mode. Only
channels 01 - 08 and 41 - 48
are available for Duplex.
Check with your local Retailer for information on available repeaters.
NOTE
Scanning
The UHF CB Radio has a scanning feature that allows you to search for active
channels automatically.
Furthermore, the UHF CB Radio is designed to have two types of scanning; Open
Scanning (OS) and Group Scanning (GS), to give you flexibility and allow you to use
the radio more effectively. Press [SCAN/OS/GS] and Scanning starts.
The SCAN icon appears.
The scan direction can be
changed at any time by
rotating the channel selector
left or right or pressing
on the Remote SPK/MIC.
UNIDEN UH5045
22
on the Remote
UHF CB Transceiver