Handling; Siting In Recesses; Relocating The On/Off Switch And Electrical Connections (If Necessary) - Viessmann B2TF Installation And Service Instructions Manual

Preparing for installation

Handling

!
Please note
Prevent damage to the appliance during han-
dling.
Never set the appliance down on its front or
sides, or apply any load to these surfaces. If
possible, leave the boiler on the pallet during
handling.

Siting in recesses

In the delivered condition, the ON/OFF switch and the
electrical connections are located on the left-hand side
of the appliance. The condensate drain can be routed
out of either the right-hand or left-hand side of the
appliance.

Relocating the ON/OFF switch and electrical connections (if necessary)

Fig. 1
10
3.
3.
5.
When installing in recesses, ensure that accessibility is
guaranteed (recommended wall clearance 100 mm).
Otherwise relocate the ON/OFF switch and electrical
connections. The ON/OFF switch can be relocated to
the right-hand side or the top. The electrical connec-
tions can be relocated to the right-hand side.
8. 2.
1.
4.