Inserting And Removing A Disc - Getac B300 User Manual

Inserting and Removing a Disc

1. Turn on the computer.
2. Open the multi-purpose bay cover by sliding the release latch towards the left.
3. Press the eject button and the DVD tray will slide out partially. Gently pull on
it until it is fully extended.
4. To insert a disc, place down the disc in the tray with its label facing up. Slightly
press the center of the disc until it clicks into place.
To remove a disc, hold the disc by its outer edge and lift it up from the tray.
5. Gently push the tray back into the drive.
6. Close the multi-purpose bay cover.
Eject button
30