Table of Contents
Advertisement
Dakota Ultrasonics
1) Press ON/OFF key to power up the MMX-6.
2) Press the ALRM key. ALAr OFF, or ALAr followed by a thickness
value and flashing IN (or MM) symbol will be displayed - indicating
the alarm mode is enabled.
3) Repeat step 2 to toggle between ALAr OFF or ALAr value and
flashing IN / MM symbol (On).
4) Assuming ALAr value flashing IN is displayed, use the UP and
DOWN arrow keys to scroll to the desired nominal alarm value.
5) Press the ALRM key once again to select the nominal value
entered.
6) The MMX-6 is now ready to perform measurements using the
Alarm feature.
Often times users and inspectors in the field are faced with coated
materials such as pipes and tanks. Typically inspectors will need to
remove the paint or coating prior to measuring, or allow for some fixed
amount of error introduced by the paint or coating thickness and velocity.
An A-Scan scope with a special echo-echo mode is generally used in order
to accurately perform measurements through paints and coatings.
20
1.800.544.2843
Alarm Mode
Dual-Multi Mode
www.calcert.com
15
10
20
5
25
0
30
sales@calcert.com
Advertisement
Table of Contents
