Table of Contents
Advertisement
PRODUCT OPERATION
1.4 Edge Cleaning (mode 3)
In this mode, robot will clean along the
wall or obstacles.
Note:
A. Switch on the robot, press MODE on
the remote controller and select edge mode.
B. Under edge cleaning mode, the robot will
do cleaning along the obstacle by its side
brushes.
1.5 Zigzag Cleaning (mode 4)
The robot will automatically go into Zigzag
cleaning when it detected it's in an open
area or the environment with less obstacles.
This mode will be more e cient and can
avoid repeated cleaning.
Note: You can press MODE on remote controller and select zigzag mode
When you switch on the robot and you press MODE on the remote
controller, user can select di erent cleaning modes during standby mode or
working status. User can stop the cleaning by pressing ON/OFF button.
Mode 1: Spiral Cleaning
Mode 2: Auto Cleaning
Mode 3: Edge Cleaning
Mode 4: Zigzag Cleaning
www.PyleUSA.com
12
Advertisement
Table of Contents
