CTC Union IGS-804SM-SE-8PHE Quick Installation Manual

Introduction
IGS-804SM-SE-8PH(E) models are industrial grade managed Gigabit Sync
Ethernet switches with PoE+ function that provide stable and reliable Ethernet
transmission. Housed in rugged DIN rail or wall mountable enclosures, these
switches are designed for harsh environments, such as industrial networking and
intelligent transportation systems (ITS) and are also suitable for many military and
utility market applications where environmental conditions exceed commercial
product specifications. IGS-804SM-SE-8PH(E) models also provide Hi-pot isolation
protection for Ethernet ports and power that can protect your devices from
damages caused by unexpected surges. Standard operating temperature range
models (-10°C~60°C) and wide operating temperature range models (-40°C~75°C)
are available to fulfill the special needs of industrial automation applications.
Package List
 IGS-804SM-SE-8PH(E) with terminal block
 Console cable (RJ-45 to D-B9)
 CD (User Manual, Smart Config, MIB File)
Features
 Redundant dual 48VDC or -48VDC power
 Support negative power input with isolated RS-232 console port
 IP30 rugged metal housing & fanless
 Wide temperature range -40°C~75°C (IGS-804SM-SE-8PHE)
 Support IEEE1588 PTPv2 for precise time synchronization
 Console, Telnet, Web and SNMP management
 4KV surge protection for UTP and PoE ports
 2.25K VDC Hi-pot isolation protection for Ethernet ports and power
 Railway Traffic EN50121-4, EMS & EMI for heavy industrial environment
EN61000-6-2, EN61000-6-4 & EN60950-1 for safety
Specifications
Ethernet Interface
 Standards: IEEE802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab (1000Base-T)
 RJ-45 (shielded) Ports: 8
 Speed: 10/100/1000M (Auto)
Optical Interface
 Standards: IEEE80802.3u (100Base-FX), 802.3z (1000Base-X)
 SFP-based slots: 4
 Speed: 100/1000M (Manual)
Switch Features
 Store & Forward Switch
 Supports IEEE802.3x Flow Control
 Auto MDI/MDI-X
 Duplex: Full/Half (Auto-negotiation per IEEE802.3u)
 Switching Fabric: 24Gbps (Non-blocking)
 Memory Buffer: 512K Bytes
 MAC Table: 8K
 MTU: 9600 bytes
Power over Ethernet
 8 x PoE enabled ports, End Span, Alternate A Mode
 Supports IEEE802.3af 15.4watts PoE per port
 Supports IEEE802.3at 30watts PoE+ per port (240W budget)
 Positive (V+) pins 1, 2; Negative (V-) pins 3, 6; Data 1, 2, 3, 6, 4, 5, 7, 8
Specifications (cont.)
Power
 Absolute Input Range: 48VDC (44V~57VDC), -48VDC
(50V~57V is recommended for IEEE802.3at PoE 30W applications)
 Support negative power input with isolated RS-232 console port
 Support Power Input Reverse Polarity Protection
 Support Dual Power Inputs
 Removable terminal block connectors
 Power Consumption:
Items Total Power
Input Voltage Consumption
50VDC 253.5W
Mechanical
 Water & Dust Proof: IP30 Protection
 Dimensions: 116 mm (D) x 91 mm (W) x 157 mm (H)
 Mounting: DIN-Rail, Wall Mount (Optional)
 Weight: 760 g
Environmental
 Operating Temperature: -10°C~60°C; -40°C~75°C (IGS-804SM-SE-8PHE)
 Storage Temperature: -40°C~85°C
 Humidity: 5%~95% (Non-condensing)
Certifications
 CE, FCC
 Railway Traffic: EN50121-4
 Immunity for Heavy Industrial Environment: EN61000-6-2
 Emission for Heavy Industrial Environment: EN61000-6-4
 EMS (Electromagnetic Susceptibility) Protection Level:
 EN61000-4-2 (ESD) Level 3, Criteria B
 EN61000-4-3 (RS) Level 3, Criteria A
 EN61000-4-4 (Burst) Level 3, Criteria A
 EN61000-4-5 (Surge) Level 3, Criteria B
 EN61000-4-6 (CS) Level 3, Criteria A
 EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m, Criteria A
 Safety: EN60950-1
 4KV surge protection for UTP and PoE ports
 Hi Pot Protection: DC 2.25KV for power to chassis ground, Ethernet ports to
chassis ground
 Shock: EN60068-2-27
 Freefall: EN60068-2-32
 Vibration: EN60068-2-6
 MTBF (MIL-HDBK-217): 564,484 Hours
Panels
3 6 5
7
2
1
 Quick Installation Guide
 Din Rail with screws
 Protective caps for SFP ports
- 1 -
Device Power
PoE Budget
Consumption
13.5W 240W
4
8 7
Figure 2. Top Panel
- 2 -
Quick Installation Guide
IGS-804SM-SE-8PH(E)
Industrial 8 X 10/100/1000Base T(X) + 4 X 100/1000Base-X SFP Slots Managed
Sync Ethernet Switches (Hardened) with 8 X PoE+
CTC Union Technologies Co., Ltd.
Far Eastern Vienna Technology Center
(Neihu Technology Park)
8F, No. 60, Zhouzi St., Neihu District, Taipei 114
Taiwan
To download this QIG or a more complete user manual, please visit
http://www.ctcu.com/Industrial/
© 2017 CTC Union Technologies Co., Ltd.
All trademarks are the property of their respective owners.
Technical information in this document is subject to change without notice.
No. Description
1. UTP/PoE RJ-45 ports
2. Fiber optic SFP slots
Power, Ring, CPU ACT, Fault LED
3.
indicators
Link/ACT, Speed & PoE LED
4.
indicators for UTP RJ-45 port
Connections
LAN and Fiber Connection
IGS-804SM-SE-8PH(E) models have 8 UTP LAN ports (labeled 1~8) and 4 fiber ports
(SFP based, labeled Fiber 9~12) on the front panel. The LAN ports that utilize shielded
RJ-45 connectors support 10/100/1000M; while the fiber SFP ports support
100/1000M.
PoE Ports
8 UTP LAN ports (labeled 1~8) support PoE (Power over Ethernet) per IEEE802.3af
(15.4W) or IEEE802.3at (30W) for connection to standard PoE PD (Power Devices) such
as IP Cameras, Access Points, IP Phones, Digital Signage, etc. PoE eliminates the need
to run separate power to these devices thereby simplifying deployment and reducing
expenses.
The LAN ports may also connect to any non-PoE device for normal Ethernet
transmission without any damage to the non-PoE device or to this device.
RJ-45 Ethernet Port Pinouts
Pin
No.
1
2
3
4
5
6
7
8
Figure 3. RJ-45 Ethernet
Port Pinouts
Console Port
The RJ-45 port labeled "Console" is an RS-232 terminal port for local management.
These models use a CLI (Command Line Interface) in addition to a user friendly Web
interface and industry standard SNMP. See page 6 for basic CLI and Web operation.
One RJ-45 to DB-9 cable is provided with this device. Console port pinouts (Figure 5)
and RS-232 DB-9 (Figure 6) connector are illustrated below together with RJ-45 to DB-
9 signal mapping information. Use the supplied cable to connect the RJ-45 Console
port to a console PC.
Figure 5. Console Port Pinout
T +886-2-26591021
F +886-2-26590237
E sales@ctcu.com
No. Description
5. Console port (RJ-45 to DB-9)
Link/ACT LED indicators for
6.
fiber optic ports
7. Terminal block
Earth grounding connection
8.
RJ-45 Ethernet
PoE
Output
100Base-TX 1000Base-T
RX+ TRD 0+ V+
RX- TRD 0- V+
TX+ TRD 1+ V-
- TRD 2+
- TRD 2-
TX- TRD 1- V-
- TRD 3+
- TRD 3-
Figure 4. RJ-45 Ethernet &
PoE Pin Assignments
Figure 6. RS-232 (Female) Pinout
- 3 -
V1.0