Table of Contents Table of Contents Español ... 1. Antes de iniciar ... 2. Instalación del Hardware ... Technical Specifications ... Troubleshooting ... Version 02.26.2009...
• Compruebe que existe una correcta regulación de la temperatura y una ventilación adecuada alrededor del conmutador • No coloque objetos pesados encima del conmutador Contenidos del paquete • TEG-S5g/TEG-S8g • Guía de instalación rápida • Adaptador de alimentación AC...
Page 4
Delivers less power when devices are off GREENnet Delivers less power with shorter cable lengths Related Products less power less power Switch Full Power Regular Switch less power Switch Full Power Regular Switch Español 100m...
CAT 5e o 6 del PC a un puerto Ethernet disponible en el TEG-S5/TEG-S8. La instalación ha sido completada Para asegurar los más altos niveles de servicio y apoyo al cliente, registre su producto en línea en: Registre su producto www.trendnet.com/register Gracias por elegir TRENDnet Español...
After connecting the Switch to a power outlet, the LEDs do not turn Check the connection of the external power adapter to the TEG-S5g/TEG-S8g and the power outlet. Also check that the power outlet is receiving power. When I connect a computer to the Switch port, the PWR and LINK/ACT LED turns on, but the 100/1000Mbps LED remains off or the light is yellow.
Page 9
Return Material Authorization (RMA) number, accompanied by a copy of the dated proof of the purchase. Products returned to TRENDnet must be pre- authorized by TRENDnet with RMA number marked on the outside of the package, and...
Page 10
ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF TRENDNET’S PRODUCTS. TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S...
Page 11
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.