Table of Contents
Advertisement
PHASE 2 – INSTALLATION
2.1 MOUNTING TRACKS INSTALLATION
2.1.1 Pull the plugs off, and apply a bead of silicone around each hole, then install the mounting tracks on the roof.
NOTE: The ends of the mounting tracks with the half-circles go to the front of the vehicle.
use
For technical support, contact us at 1-800-565-5321
use
TOOLS
q Cordless Impact
q 13mm Socket
HARDWARE USED
6×
#90-667 Hex Bolt
#98-123 Lock Washer
#98-117 Flat Washer
1530-NS Installation Guide | REV. D2 | Page 14
use
FRONT
M8 × 20mm
Advertisement
Table of Contents
