Ranger design 1530-NS Installation Manual page 18

2.2.4 Ladder Rack adjustment for extention ladder.
NOTE: • Do this step on both sides.
• The ladder cannot extend beyond the rear bumper of the vehicle.
IMPORTANT: • After installation is complete, cut the track plug underneath the front crossbow to fill all the
unused space.
• Place the ladder rack warning label on a visible area, recommended on a partition.
For technical support, contact us at 1-800-565-5321
When the rear hook touches the ladder,
the handle should be 1" below the ladder
clamp hasp.
rear hook
1"
Now adjust the front hook to be snug against
the ladder rung and tighten the bolts on the
front crossbow.
TOOLS
q Cordless Impact
q 1/2" Socket
front hook
1530-NS Installation Guide | REV. D2 | Page 18