Driver Side; Passenger Side - Ranger design 1530-NS Installation Manual

Double clamp ladder rack
Table of Contents

Advertisement

1.2.3 Slide carriage bolts on the bottom face of the crossbows.
NOTE: The track plug must be removed from the underneath of the front crossbow, and reinstalled
after the feet have been installed in the final position.
TIPS: Use tape to keep the bolts from sliding off.

DRIVER SIDE

Front crossbow
• Slide 4 pcs. of 1" carriage bolts.
Rear crossbow
• Slide 2 pcs. of 3/4" carriage bolts.
• Slide 4 pcs. of 1" carriage bolts.
HARDWARE USED
#90-487 Carriage Bolt
5/16" × 3/4" SS304
#90-491 Hex Bolt
5/16" × 1" SS304
For technical support, contact us at 1-800-565-5321

PASSENGER SIDE

Front crossbow
• Slide 4 pcs. of 1" carriage bolts.
Rear crossbow
• Slide 2 pcs. of 3/4" carriage bolts.
• Slide 4 pcs. of 1" carriage bolts.
HARDWARE USED
#90-487 Carriage Bolt
5/16" × 3/4" SS304
#90-491 Hex Bolt
5/16" × 1" SS304
1530-NS Installation Guide | REV. D2 | Page 7

Advertisement

Table of Contents
loading

Table of Contents