Resistance Measurements (K Range) - Megger ME1000351 User Manual

Note: The test current displayed is the actual test current used during the test, which
will depend on the resistance of the circuit under test.

12. Resistance measurements (k Range)

(Except MIT40X and MIT480)
Test procedure (refer to Figure 10)
Step 2:
Connect leads
to conductors
Step 3:
Result displayed
Step 1:
1. Turn the instrument 'ON' by rotating the selector switch to the desired [k ]
position.
2. Connect the test leads to the isolated conductors under test.
3. Observe the test result, displayed automatically.
Figure 10 Resistance – k range
19