Notes About Installation - Star TSP100III Series Hardware Manual

1-2. Notes about Installation

1. Choose a firm, level surface where the printer will not be exposed to vibration.
2. Make sure that the printer is connected to a reliable power outlet. It should not be on the
same electric circuit as copiers, refrigerators, or other appliances that cause power spikes.
3. The power outlet you plan to connect to for power should be nearby and unobstructed.
4. Make sure that the printer is not exposed to direct sunlight.
5. Make sure that the printer is well away from heaters and other sources of extreme heat.
6. Do not locate the printer in a badly ventilated or dusty environment.
7. Make sure that the room where you are using the printer is not too humid.
8. Use the printer within the boundaries indicated in the environmental requirements. Even
when the ambient temperature and humidity are within the specifications, avoid radical
changes in environmental conditions. The suitable operating temperature range is as fol-
lows:
Operating temperature: 5°C to 45°C
9. When disposing of the printer, obey local regulations.
– 7 –