Link Aggregation Setup; Table 29 Link Aggregation Control Protocol: Status - ZyXEL Communications GS-4012F/4024 User Manual

Table 29 Link Aggregation Control Protocol: Status

LABEL
Index
Aggregator ID
Enabled Port
Synchronized
Ports
Poll Interval(s)
Stop

15.3 Link Aggregation Setup

Click Configuration in the Link Aggregation Control Protocol Status screen to display the
screen shown next.
Chapter 15 Link Aggregation
DESCRIPTION
This field displays the trunk ID to identify a trunk group, that is, one logical link
containing multiple ports.
Refer to Section 15.1.2 on page 111
These are the ports you have configured in the Link Aggregation screen to be in the
trunk group.
These are the ports that are currently transmitting data as one logical link in this trunk
group.
The text box displays how often (in seconds) this screen refreshes. You may change
the refresh interval by typing a new number in the text box and then clicking Set
Interval.
Click Stop to halt statistic polling.
GS-4012F/4024 User's Guide
for more information on this field.
112