ZyXEL Communications GS-4012F/4024 User Manual page 251

GS-4012F/4024 User's Guide
Table 95 Command Summary: Configuration Mode (continued)
COMMAND
multi-login
mvr <vlan-id>
no bandwidth-control
bcp-transparency
classifier
cluster
dhcp relay
dhcp server <vlan-
id>
diffserv
https
igmp-filtering
igmp-snooping
ip
251
<name>
<name> inactive
member <mac-
address>
information
option
default-gateway
primary-dns
secondary-dns
timeout
profile <name>
profile <name>
start-address
<ip> end-address
<ip>
Chapter 40 Introducing the Commands
DESCRIPTION
Enables multi-login.
Enters the MVR (Multicast
VLAN Registration)
configuration mode.
Refer to Section 40.10 on page
266 for more information.
Disable bandwidth control on
the switch.
Disables the classifier. Each
classifier has one rule.
If you disable a classifier you
cannot use policy rule related
information.
Enables a classifier.
Disables cluster management
on the switch.
Removes the cluster member.
Disables DHCP relay.
Disables the relay agent
information option 82.
System name is not appended
to option 82 information field.
Disables DHCP server settings.
Disables DHCP server default
gateway settings.
Disables DHCP primary DNS
server settings.
Disables DHCP server
secondary DNS settings.
Disables the DiffServ settings.
Resets the session timeout to
the default of 300 seconds.
Disables IGMP filtering on the
switch.
Disables the specified IGMP
filtering profile.
Clears the settings of the
specified IGMP filtering profile.
Disables IGMP snooping.
Sets the management IP
address to the default value.