Link Aggregation Setup; Table 14-1 Link Aggregation: Link Aggregation Protocol Status - ZyXEL Communications Dimension ES-3124 User Manual

The following table describes the labels in this screen.

Table 14-1 Link Aggregation: Link Aggregation Protocol Status

LABEL
Index
Aggregator ID
Enabled Ports
Synchronized Ports
Poll Interval(s)
Stop

14.3 Link Aggregation Setup

Click Configuration in the Link Aggregation Protocol Status screen to display the screen shown next.
You can configure up to six link aggregation groups and each group can aggregate up to eight ports.
Link Aggregation
This field displays the trunk ID to identify a trunk group, that is, one logical link containing
multiple ports.
Refer to Figure 14-1 for more information on this field.
These are the ports you have configured in the Link Aggregation screen to be in the
trunk group.
These are the ports that are currently transmitting data as one logical link in this trunk
group.
The text box displays how often (in seconds) this screen refreshes. You may change the
refresh interval by typing a new number in the text box and then clicking Set Interval.
Click Stop to halt statistic polling.
Dimension ES-3124 Ethernet Switch
DESCRIPTION
14-3