Table 18 Static Mac Forwarding - ZyXEL Communications GS-4012F/4024 User Manual

GS-4012F/4024 User's Guide

Table 18 Static MAC Forwarding

LABEL
Active
Name
MAC Address
VID
Port
Add
Cancel
Clear
Index
Active
Name
MAC Address
Port
Delete
Cancel
95
DESCRIPTION
Select this check box to activate your rule. You may temporarily deactivate a rule
without deleting it by clearing this check box.
Enter a descriptive name (up to 32 printable ASCII characters) for identification
purposes for this rule.
Enter the MAC address in valid MAC address format, that is, six hexadecimal
character pairs.
Note: Static MAC addresses do not age out.
Enter the VLAN identification number.
Select a port where the MAC address entered in the previous field will be
automatically forwarded.
After you set the fields above, click Add to insert a new rule.
Click Cancel to reset the fields.
Click Clear to begin configuring this screen afresh.
Click an index number to modify the settings.
This field displays whether this static MAC address forwarding rule is active (Yes) or
not (No). You may temporarily deactivate a rule without deleting it.
This field displays the descriptive name for this rule.
This field displays the MAC address that will be forwarded and the VLAN identification
number to which the MAC address belongs.
This field displays the port where the MAC address shown in the next field will be
forwarded.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
Chapter 9 Static MAC Forward Setup