Getting To Know Your Switch; Introduction; Software Features - ZyXEL Communications GS-4012F/4024 User Manual

Getting to Know Your Switch

This chapter introduces the main features and applications of the switch.

1.1 Introduction

Your switch is a stand-alone layer-3 Gigabit Ethernet switch. By integrating router functions,
the switch performs wire-speed layer-3 routing in addition to layer-2 switching.
The GS-4024 comes with 24 Gigabit Ethernet ports and four Gigabit/mini-GBIC ports
The GS-4012F comes with with 12 min-GBIC slots and four Gigabit/mini-GBIC ports. There
are two GS-4012F models. The GS-4012F DC model requires DC power supply input of -48
VDC or -60 VDC, 1.2A Max. The GS-4012F AC model requires 100~240VAC/1.5A power.
With its built-in web configurator, managing and configuring the switch is easy. In addition,
the switch can also be managed via Telnet, any terminal emulator program on the console port,
or third-party SNMP management.

1.2 Software Features

This section describes the general software features of the switch.
IP Routing Domain
An IP interface (also known as an IP routing domain) is not bound to a physical port.
Configure an IP routing domain to allow the switch to route traffic between different
networks.
DHCP
DHCP (Dynamic Host Configuration Protocol RFC 2131 and RFC 2132) allows individual
computers to obtain TCP/IP configuration at start-up from a server. You can configure the
switch as a DHCP server or disable it. When configured as a server, the switch provides the
TCP/IP configuration for the clients. If you disable the DHCP service, you must have another
DHCP server on your LAN, or else the computer must be manually configured.
Chapter 1 Getting to Know Your Switch
GS-4012F/4024 User's Guide
C
H A P T E R
1
32