Table of Contents
Advertisement
7. Repeat the above steps to configure other regions. Up to 4 regions can be set.
You can click the Clear button to clear all pre-defined regions.
8. You can click the Clear button to clear the pre-defined region.
9. Set the arming schedule. Refer to Task 2: Set Arming Schedule for Motion
Detection in Section 5.6.1.
10. Set the linkage method. Refer to Task 3: Set Linkage Method for Motion Detection
in Section 5.6.1.
11. Click Save to save the settings.
User Manual of Network Fisheye Camera
Figure 5-54 Intrusion Detection Settings
95
Advertisement
Table of Contents
