Table of Contents
Advertisement
User Manual of Network Fisheye Camera
Normal configuration adopts the same set of motion detection parameters in the
daytime and at night.
Tasks 1: Set the Motion Detection Area
Steps:
1. Enter the Motion Detection Settings interface.
Configuration > Event > Basic Event > Motion Detection
2. Check the checkbox of Enable Motion Detection.
3. (Optional) Check the checkbox of Enable Dynamic Analysis for Motion if you
want to mark the detected objects with green rectangles on the live view
window.
Note:
You can go to Configuration > Local Configuration > Live View
Parameters, and then select Disable for Rules if you don't want the detected
Figure 5-45 Motion Detection Settings
82
Advertisement
Table of Contents
