Table of Contents
Advertisement
User Manual of Network Fisheye Camera
human, vehicle, etc.) will be marked in the video stream. Then, you can set rules on
the connected rear-end device to detect the events including line crossing, intrusion,
etc.
Figure 5-44 Display Info. on Stream Setting
5.6 Configuring Event Settings
This section explains how to configure the network camera to respond to alarm
events, including motion detection, video tampering, alarm input, alarm output,
exception, exception detection, intrusion detection, and line crossing detection, etc.
These events can trigger the linkage methods, such as Notify Surveillance Center,
Send Email, Trigger Alarm Output, etc.
Note:
Check the checkbox of Notify Surveillance Center if you want to push the
alarm information to the surveillance client such as the mobile phone, computer, etc.,
as soon as the alarm is triggered.
5.6.1 Configuring Motion Detection
Purpose:
Motion detection detects the moving objects in the configured surveillance area, and
a series of actions can be taken when the alarm is triggered.
In order to detect the moving objects accurately and reduce the false alarm rate,
normal configuration and expert configuration are selectable for different motion
detection environment.
Note:
Motion Detection is not supported when the decoding mode is hardware
decoding and the display mode is 4PTZ.
●
Normal Configuration
81
Advertisement
Table of Contents
