Table of Contents
Advertisement
2. Select a camera channel to configure from the Channel No. drop-down list.
3. Select the stream type for this channel. Main stream and sub stream are
selectable.
4. Set fixed regions for ROI.
1) Select the Region No. from the drop-down list.
2) Click Drawing. Click and drag the mouse on the view screen to draw a red
rectangle as the ROI region. You can click Clear to cancel former drawing.
Click Stop Drawing when you finish.
3) Check the Enable checkbox to enable ROI function for the chosen region.
4) Select the ROI level.
5) Enter a region name for the chosen region.
6) Click Save the save the settings of ROI settings for chosen fixed region.
User Manual of Network Fisheye Camera
Figure 5-39 Region of Interest Settings
73
Advertisement
Table of Contents
