Table of Contents
Advertisement
User Manual of Network Fisheye Camera
Note:
The time of each period can't be overlapped. Up to 8 periods can be
configured for each day.
Task 3: Set the Linkage Method for Motion Detection
Click Linkage Method and check the checkbox to select the linkage method.
audible warning, notify surveillance center, send email, upload to FTP, trigger
channel, trigger alarm output, and smart tracking are selectable. You can specify
the linkage method when an event occurs.
Audible Warning
Trigger the audible warning locally. And it only supported by the device that
has the audio output.
Notify Surveillance Center: Send an exception or alarm signal to remote
management software when an event occurs.
Send Email: Send an email with alarm information to a user or users when
an event occurs.
Note:
To send the Email when an event occurs, please refer to Section 5.3.8
to complete Email setup in advance.
Upload to FTP: Capture the image when an alarm is triggered and upload
the picture to a FTP server.
Notes:
•
Set the FTP address and the remote FTP server first. Refer to Section
5.3.7 Configuring FTP Settings for detailed information.
•
Go to Configuration > Storage > Schedule Settings> Capture > Capture
Figure 5-47 Linkage Method Settings
84
Advertisement
Table of Contents
