Table of Contents
Advertisement
User Manual of Network Fisheye Camera
(5) Set the arming schedule and linkage method as in the normal
configuration mode.
(6) Click Save to save the settings.
●
Day/Night Auto-Switch
Steps:
(1) Draw the detection area as in the normal configuration mode. The
supported area varies according to the different camera models.
(2) Select Auto-Switch for Switch Day and Night Settings.
(3) Select the area by clicking the area No..
(4) Slide the cursor to adjust the sensitivity and proportion of object in the
area for the selected area in the daytime.
(5) Slide the cursor to adjust the sensitivity and proportion of object in the
area for the selected area at night.
(6) Set the arming schedule and linkage method as in the normal
configuration mode..
(7) Click Save to save the settings.
●
Day/Night Scheduled-Switch
Steps:
(1) Draw the detection area as in the normal configuration mode. The
supported area number varies according to different camera models.
(2) Select Scheduled-Switch for Switch Day and Night Settings.
(3) Select the start time and end time for the switching timing.
(4) Select the area by clicking the area No..
(5) Slide the cursor to adjust the sensitivity and proportion of object in the
area for the selected area in the daytime.
(6) Slide the cursor to adjust the sensitivity and proportion of object in the
area for the selected area at night.
(7) Set the arming schedule and linkage method as in the normal
configuration mode.
87
Advertisement
Table of Contents
