Settings - OV Solutions C-OVE-12DVIR-FE User Manual

Steps:
1. Enter DST Settings interface:
Configuration > System > System Settings > DST
2. Check the checkbox of Enable DST to enable daylight saving time.
3. Set the start time and end time for the DST period.
4. Select the DST bias from the drop-down list.
5. Click Save to save the settings.
5.2.3 RS-232 Settings
Purpose:
The RS-232 port can be used in two ways:
 Parameters Configuration: Connect a computer to the camera through the serial
port. Device parameters can be configured by using software such as
HyperTerminal. The serial port parameters must be the same as the serial port
parameters of the camera.
 Transparent Channel: Connect a serial device directly to the camera. The serial
device will be controlled remotely by the computer through the network.
Steps:
1. Enter RS-232 Port Setting interface:
Configuration> System > System Settings > RS232
User Manual of Network Fisheye Camera
Figure 5-6 DST Settings
42