camera provides the security service for better user experience.
Steps:
1. Go to Configuration > System > Security > Security Service to enter the security
service configuration interface.
2. Check the checkbox of Enable SSH to enable the data communication security,
and uncheck the checkbox to disable the SSH.
3. Check the checkbox of Enable Illegal Login Lock, and then the IP address will be
locked if the admin user performs 7 failed user name/password attempts (5 times
for the operator/user).
Note:
If the IP address is locked, you can try to login the device after 30 minutes.
5.2.11 User Management
Enter the User Management interface:
Configuration > System > User Management
Adding a User
The admin user has all permissions by default and can create/modify/delete other
accounts.
The admin user cannot be deleted and you can only change the admin password.
Steps:
User Manual of Network Fisheye Camera
Figure 5-16 Security Service
Figure 5-17 User Information
49