Connecting Audio Equipment - Yamaha RP-U100 Owner's Manual

Connecting Audio Equipment

The following illustration shows how to connect a CD player and MD or tape recorder.
The CD player is shown connected to the RP-U100 using both analog and digital connec-
tions. However, it's not necessary to make both connections. Since digital offers higher
quality, use the digital connection if your CD player had a digital output. The MD/tape
recorder is shown connected to the RP-U100 using analog and digital connections. If your
MD player has a digital input, connect it as shown. Be careful not to mix up the left and
right connections.
DIGITAL
OUT
(OPTICAL)
DIGITAL
IN
(OPTICAL)
MD/tape recorder
LINE OUT
(PLAY)
Note: The DIGITAL AUX 1 OPT IN has priority over the ANALOG AUX 1 IN, so if you
connect to both inputs, the signal received at the DIGITAL AUX 1 OPT IN is used.
Protective Caps
When connecting to an optical connector,
remove its protective cap first. When an
optical connector is not being used,
replace its cap to prevent dust entering the
connector.
LINE OUT
CD player
LINE IN
(REC)
PC IN
AUX 1
IN
PC IN
AUX 2
AUX 1
SUB
IN
WOOFER
OUT
ANTENNA
IN
AUX 2
OUT
SPEAKERS
R L
ANALOG
IN
OUT
R L
DIGITAL
AM
USB
GND
COAX IN
FM
PC
75
UNBAL
OPT IN
R L
AUX 1
OPT IN
+
AUX 1
OPT OUT
–
OPT IN
6 MIN./SPEAKER
OPT OUT
6