Connecting External Devices; Connecting Audio Devices - Yamaha RN800ASL User Manual

PREPARATION > Connecting external devices

Connecting external devices

Connecting audio devices

This explains connecting audio devices, such as a CD player, to the product.
Use the type of cable appropriate for the jacks of the device to be connected, such as an RCA cable, optical
fiber cable, or coaxial cable, which are commercially available.
Rear panel
1
OPTICAL
ANALOG IN
DIGITAL IN
CD 1 2 1 2
OPTICAL COAXIAL USB
R L
ANTENNA
1
FM AM
2
75
GND
R L
LINE
R L R L
TRIGGER SUBWOOFER
PHONO PRE OUT 12V 0.1A OUT OUT
NOTE
The DIGITAL IN jacks of this product are only compatible with PCM signal (2-channel).
(
The PHONO jacks of this product are compatible with MM cartridges. Use a step-up transformer or the like when connecting a
(
turntable (record player) equipped with an MC (low-output) cartridge.
For some turntables, connecting to the GND terminal of this product may reduce noise. However, there are also some turntables
(
that have less noise if they are not connected to the GND jack.
The GND terminal is not an electrical ground for safety purposes.
(
Related links
"Rear panel" (p.19)
DIGITAL IN jacks
O
2 1 2
COAXIAL C
NETWORK
CD
L
R L
SPEAKERS
R
R
A
1
ANALOG IN jacks
B
2
R L
LINE
PRE OUT jacks
L
R
PRE OUT
GND
L
R
PHONO
PHONO jacks
Audio outputs (either optical digital, coaxial digital, or
analog stereo)
O
OPTICAL
C
COAXIAL
L
L
R
R
Audio IN (Analog Stereo)
LINE
L
L
R
R
Ground wire
GND
PHONO
L
L
R
R
Audio OUT (PHONO)
25
Audio device
External amplifier
Turntable