Connecting External Devices; Connecting Audio Devices - Yamaha MusicCast R-N2000ASL User Manual

PREPARATION > Connecting external devices

Connecting external devices

Connecting audio devices

This explains connecting audio devices, such as a CD player, to the product.
Use the type of cable appropriate for the jacks of the device to be connected, such as an RCA cable, optical
fiber cable, or coaxial cable, which are commercially available.
Rear panel
DIGITAL IN
1 2
ANTENNA OPTICAL COAXIAL SPEAKERS L CH
FM
ANALOG IN
LINE 1
SUBWOOFER
75 OUT
CD LINE 2 PRE OUT
R L R L R L
TRIGGER
OUT
GND
12V 0.1A
PHONO
R L
PRE OUT jacks
GND
PHONO jacks
NOTE
The DIGITAL IN jacks of this product are only compatible with PCM signal (2-channel).
(
The PHONO jacks of this product are compatible with MM cartridges. Use a step-up transformer or the like when connecting a
(
turntable (record player) equipped with an MC (low-output) cartridge.
For some turntables, connecting to the GND terminal of this product may reduce noise. However, there are also some turntables
(
that have less noise if they are not connected to the GND jack.
The GND terminal is not an electrical ground for safety purposes.
(
Related links
"Rear panel" (p.18)
DIGITAL IN jacks
O
1 2
OPTICAL COAXIAL
C
NETWORK
LINE 1
L
USB
R
A
ANALOG IN jacks
CD LINE 2
R L R L
B
L
PRE OUT
R
L
R
PHONO
Ground wire
Audio outputs (either optical digital, coaxial digital, or
analog stereo)
O
Audio device
OPTICAL
C
COAXIAL
L
L
R
R
External amplifier
LINE
L
L
R
R
Audio IN (Analog Stereo)
PHONO
L
L
R
R
GND
Audio OUT (PHONO)
23
Turntable