Yamaha RP-U100 Owner's Manual page 53

Opening Page
USB
DIGITAL
ANALOG
The USB capture function is not available in PC input mode.
USB capture details
AUX1 Mode
This mode serves for playing back the external input signal. There are digital (optical)
and analog signal input jacks. Automatic switching gives priority to digital signals.
USB Capture
In AUX1 mode, the signal that will be recorded by USB capture is the signal input
from the AUX1 - ANALOG input jacks on the main unit. If AUX1 - DIGITAL was
selected, the RP-U100 will automatically switch over to AUX1 - ANALOG.
Also when the USB MIX LEVEL setting is active, the mixed signal from a computer
connected with the USB cable cannot be captured.
USB capture details
This position serves for playing back a digital audio signal from the
computer supplied to the RP-U100 via the USB link.
To use this position, the USB cable must be connected between
the PC and the RP-U100, and appropriate settings must be made
on the computer to output the audio signal.
USB connection details
This position serves for playing back a digital audio signal from the
computer supplied to the RP-U100 via the digital input jacks.
Both optical and coaxial jacks are provided. The RP-U100
performs automatic switching by hardware, giving priority to the
optical input.
This position serves for playing back an analog audio signal from the
computer supplied to the RP-U100 via the analog input jacks.
AUX1 Mode
AUX1 mode
AUX2 Mode
24/68 ページ