Yamaha RP-U100 Owner's Manual page 83

Opening Page
Calling Up the Tuner Panel
Selecting tuner mode in the input selector on the main panel and clicking
the frequency display panel.
Tuner Panel (frequency displa y) functions
Panel
Component
FM/AM
selector
button
Auto scan
buttons
Manual tuning
buttons
(Frequency Display)
Click on FM or AM to select the respective frequency band.
Select FM Auto Stereo or FM Mono with the
button..
This function automatically scans the frequency band for stations.
Auto scan may not be able to tune in a station if its signal is weak.
Clicking the Scan button starts the station search.
The search ends when a station is found.
Click the Scan button again if the scan stops during the search.
Search stops also when the auto-scan button is clicked during search.
To restart search, click the auto-scan button.
If no station is found, the search stops at the frequency where the
search began.
This button lets you tune to a station manually.
The frequency increases or decreases by one step each time
is clicked.
Keeping a button clicked causes the frequency to change continuously.
Tuner Panel
Tuner mode
Function
Auto scan function
Manual tuning operation
[Panel image On][Panel image
FM mode selector
54/68 ページ
Off]
brings up
or