Yamaha RP-U100 Owner's Manual page 34

Opening Page
USB Capture
For USB capture, analog signals input to the analog jacks on the RP-U100 are
subjected to analog/digital (A/D) conversion and then output in digital form via the
USB link to a personal computer. This function allows the digital data to be
recorded on the computer, using an application such as a sound recorder.
Input jacks for data capture
Which input jacks are used for data capture depends on the mode selected with
the input selector.
Input selector details
Mode
AUX1
AUX2
TUNER
The USB capture function is not available in PC input mode.
Data Recording Methods
The RP-U100 Application does not include a recording function. Please use
appropriate recording software installed on the computer. For information on how
to use the software, please refer to its documentation.
The sound recorded with the USB capture function is the original sound of the
input signal. The effects of the DSP sound field programs of the RP-U100 are not
recorded.
The data format supplied to the computer is 44.1 kHz, 16 bit, stereo. Make sure
that the recording software is set up properly to handle this format.
While making a recording using USB capture, you should close all other applications
running on the computer. Otherwise recording quality may be poor.
Note
Digital input signals cannot be captured.
If data capture is activated while using the AUX1 - DIGITAL inputs, the RP-U100
automatically switches to the AUX1 - ANALOG inputs. After capture has ended,
the setting automatically returns to the AUX1 - DIGITAL inputs.
Input jacks used for data capture
AUX1 - ANALOG jack
AUX2 - ANALOG jack
Internal tuner signal
Function List
5/68 ページ