Yamaha RP-U100 Owner's Manual page 79

Opening Page
Virtual Rear Speaker Position
Personal Setting
Main & Sub
Balance
Listening Position
Setting the Virtual Rear Speaker Position
To set the virtual rear speaker positions, click the
or directly drag the virtual rear speaker and move it to the desired position.
The virtual rear speakers are set symmetrically left and right.
?
Balance Setting
Adjust the balance by dragging the pointer
Virtual 3D parameter
Sets the position of the virtual rear speakers.
In Virtual 3D, the sound field effect will vary according to environment factors
such as the listening position and the shape of the room.
The virtual rear speaker position may therefore not exactly match the position
displayed on the setting screen.
The Main and Sub parameters allow the listener to adjust
the virtual rear speaker position to the point where the best
effect is achieved.
your personal preferences.
Sets the level balance for the left and right speakers.
Other
The listening position refers to the spot where the listener actually sits and
listens to the sound.
This is not a parameter set on the RP-U100, but the actual position has a
considerable influence on the Virtual 3D effect.
Center Position Display
or clicking the L(left)/R(right) arrows.
Change this parameters
squares shown in the figure below
50/68 ページ
as needed to match