Table of Contents
Advertisement
T
IMAGE FLIP Button
Toggle switches between [H FLIP], [V FLIP], [180° ROTATE]
and [NONE]. See
page
34.
ACTIVE PICTURE Button
Selects active picture.
MULTI PICTURE Button
ON/OFF Button: Toggle switches between ON and OFF.
MODE Button: Selects a mode from PIP (picture in picture)
or PBP (picture by picture).
CHANGE Button: Swaps images between two pictures.
PICTURE ASPECT Button: Selects active picture frame
aspect.
NOTE: Enable to change each multi picture size by pressing
SET/POINT ZOOM button during multi picture mode.
REMOTE ID Button
Activates the REMOTE ID function. See
MTS Button*
1
*1: This button's action depends on which Option Board you are using.
Refer to the Option Board's user's manual for further information.
NOTE:
The buttons with no explanation do not function.
Operating Range for the Remote
Control
Point the top of the remote control toward the monitor's
remote control sensor during button operation.
Use the remote control within a distance of about 7 m (23 ft.)
from the remote control sensor, or at a horizontal and
vertical angle of within 30° and within a distance of about
3.5 m (10 ft.).
page
46.
NOTE:
Handling the remote control
•
•
•
•
English-13
The remote control system may
not function when direct sunlight
or strong illumination strikes
the remote control sensor, or
when there is an object in
the path.
Do not expose to strong shock.
Do not allow water or other liquid to
splash on the remote control. If the
remote control gets wet, wipe it dry
immediately.
Avoid exposure to heat and steam.
Except to install the batteries, do not open the remote
control.
Advertisement
Table of Contents
