Wireless Remote Control - NEC MultiSync V554Q-R User Manual

Wireless Remote Control

A
POWER ON/STANDBY Button
Switches the power on/standby.
B
INPUT Button
Selects the input signal.
Input signal for the MEDIA PLAYER is shown as MP.
C
OPTION MENU Button
D
KEYPAD
Press the buttons to set and change passwords, change
channel and set REMOTE ID.
The following buttons are used for [CEC] (Consumer
Electronics Control) (See page
function (See page 21): 1
E
ENT Button
Confirm the AUTO PLAY FOLDER in Media Player.
F
DISPLAY Button
Turns on/off the information OSD. See
If you lock remote control buttons using the [IR LOCK
SETTINGS] function, you can unlock the buttons by holding
down this DISPLAY button for more than 5 seconds.
G
MENU Button
Turns on/off the menu mode.
H
EXIT Button
Returns to the previous menu within the OSD menu.
43) and the Media Player
, 2 , 3 , 5 , 6 .
page 27.
I
p/q Button (up/down button)
Acts as pq button to move the highlighted area up or down
to select adjustment items within the OSD menu.
When using PIP (picture in picture), moves the small screen
up or down.
J
-/+ Button (minus/plus button)
Increases or decreases the adjustment level within the OSD
menu settings.
When using PIP (picture in picture), moves the small screen
left or right.
K
SET/POINT ZOOM Button
SET: When OSD is shown, this button acts as "set button"
when you make a selection.
POINT ZOOM: When OSD is not shown, this button acts as
"point zoom button".
L
VOLUME +/- Button
Increases or decreases the audio output level.
M
CH/ZOOM +/- Button*
Increases or decreases the POINT ZOOM level.
Please refer to POINT ZOOM (See
N
GUIDE Button*
O
MUTE Button
Turns on/off the mute function.
P
PICTURE MODE Button
Selects the picture mode, [HIGHBRIGHT], [STANDARD],
[sRGB], [CINEMA], [CUSTOM1], [CUSTOM2],
[SVE-(1-5) SETTINGS]. See
HIGHBRIGHT: For moving images such as DVD.
STANDARD: For images.
sRGB: For text based images.
CINEMA: For movies.
CUSTOM1 and CUSTOM2: Custom setting.
SVE-(1-5) SETTINGS: For images and movies.
Q
ASPECT Button
Selects the picture aspect, [FULL], [WIDE]*, [DYNAMIC]*,
[1:1], [ZOOM] and [NORMAL]. See
* HDMI1, HDMI2, HDMI3 inputs only.
R
AUDIO INPUT Button
Selects the audio input source [IN], [HDMI1], [HDMI2],
[HDMI3], [DisplayPort1], [DisplayPort2], [OPTION]*
[C MODULE]* .
2
S
STILL Button
ON/OFF Button: Activates/deactivates still picture mode.
CAPTURE Button: Captures still picture.
NOTE: This function deactivates when selecting [MULTI
PICTURE MODE], [TEXT TICKER], [SCREEN SAVER],
POINT ZOOM, [IMAGE FLIP] except for [NONE], [SUPER] in
[INPUT CHANGE], [TILE MATRIX].
If input signal is [OPTION], this button's actions depend on
which Option Board you are using.
*1: This button's action depends on which Option Board you are using.
*2: This input is available when the optional Raspberry Pi Compute Module
Interface Board and Raspberry Pi Compute Module are installed.
English-12
1
page 58).
1
page 30.
page 20.
, [MP],
1