Advertisement
● Reference of attached cord for drivers
Type
Attached Cord
A
2m Cord ESD Type (5P)
B
1.5m Cord Type (5P)
C
2m Cord Type (5P)
D
2m Cord ESD Type (6P)
E
2m Cord Type (6P)
* The applicable cord especially for OPC is 6PIN type. (*Regular cord is
5PIN type) Combination type screw driver (ex. ESD+OPC) is attached
applicable type cord (2m).
● External Dimensions
BL-2000
∅26
BL-5000
Max. ∅ 38 Min. ∅ 32
（ WD cut shape ）
■ Power Supplies
The Brushless Driver must be operated together with a Power
Pack.
Powering the Brushless Driver with the Hios T-45BL and the
T-70BL Power Pack will insure operation of the driver at its
full capacity.
● BL driver and Power Pack combinations
Power Pack Model
Power Pack for
Brushless Driver
■ Cautions to Observe When Using
1. In push-to-start mode, the driver will begin turning in
response to only a slight pressure. Take care that it is
under complete control when in push-to-start mode.
2. The driver can be damaged by accidental falls or impacts.
3. Take care to avoid exposing the driver to oil based
Type
172
207
T-45BL
T-70BL
2m Cord ESD Type (5P) & Iinclude
F
ESD Vinyl tube
2m Cord ESD Type (5P) & Iinclude
G
Vinyl tube
1.5m Cord Type (5P) & Iinclude
H
Vinyl tube
2m Cord Type (5P) & Iinclude Vinyl
I
tube
BL-3000
∅32.5
BL-7000
Max. ∅ 40 Min. ∅ 36
（ WD cut shape ）
Max. number of drivers
BL-2000 BL-3000 BL-5000 BL-7000
1
1
1
1
- 5 -
Attached Cord
195
239
1
1
1
Advertisement
