DFI 586IHX User Manual page 48

Table of Contents

Advertisement

HARD DISKS
TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE
Primary Master:
OPTIONS
SIZE CYLS HEAD
2 (Y)
853
1
853
3
853
Note: Some OS (like SCO-UNIX) must be "NORMAL" for installation
Enter your choice, and press <Enter> to accept the parameters or press
<Esc> to abort. The parameters of the hard disk will be displayed in the
Standard CMOS Setup.
Hard Drive Mode
The system board supports three HDD modes: Normal, LBA and Large.
If your hard disk drive does not support LBA mode, the " LBA" option will
not be displayed. If your HDD has 1024 or fewer cylinders, the " Large"
option will not be displayed. If your hard drive is larger than 2.1GB, be
sure that your operating system supports it or you may need to create
separate partitions.
Normal Mode
Normal mode is the generic access mode in which neither the BIOS nor
the IDE controller will make any transformations during hard drive
access.
The maximum number of cylinders, heads and sectors for Normal mode
are 1024, 16 and 63, respectively.
48
ROM PCI/ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
Select Primary Master Option (N=Skip): N
PRECOMP LANDZ SECTOR
827
32
0
1653
1654
16
65535
1653
827
32
65536
1653
ESC: Skip
no. Cylinders
(1024)
x no. Heads
( 16)
x no. Sectors
( 63)
x bytes per sector
( 512)
528 megabytes
MODE
63
LBA
63
Normal
63
Large

Advertisement

Table of Contents
loading

Table of Contents