DFI G586OPA User Manual page 40

PCI/ISA System Board
Floppy Disk Drive Controller
The G586OPA system board has a built-in floppy disk
controller that supports two standard floppy disk drives.
You can install any 360KB/720KB/1.2MB/1.44MB/
2.88MB floppy disk drives.
Connecting the Floppy Disk Cable
The Floppy Disk Connector on the
Step 1
Install the 34-pin header connector into the floppy disk
connector (JP5) on the system board. The colored edge
of the ribbon should be aligned to pin 1 of the JP5
connector.
2-30 u Installation Overview
G586OPA System Board