Table of Contents
Advertisement
PCI/ISA System Board
The Primary and Secondary Serial Ports
Parallel Port
The G586OPA system board has a standard connector
for interfacing your PC to a parallel printer. This port is
compatible with both IBM AT printer ports and the
new, high speed, bi-directional Extended Capabilities
Port standard. The parallel port on your system board
can be set to any of the following system I/O addresses:
Port Configuration
* Default setting
2-28 u Installation Overview
on the G586OPA System Board
I/O Address
LPT1
3BC-3BE Hex
LPT2*
378-37A Hex
LPT3
278-27A Hex
Advertisement
Table of Contents
