Edit Menu - Yamaha TENORI-ON TNR-W Manual

■

Edit Menu

The Edit menu provides access to data editing functions such as copy, clear, and reset.
The Edit menu submenu includes the following 6 items.
1. Copy this Block
2. Clear this Block
3. Copy this Layer
4. Clear this Layer
5. Clear All Blocks
6. Reset All Blocks
Use the jog dial to highlight a submenu item, then press the [OK] button to go to the
corresponding parameter edit display.
The Undo Function
When you press the [OK] button to execute a copy, clear, or reset function from the Edit
menu, the "UNDO" display shown below will appear after the copy, clear, or reset function
has been completed. To undo the function just executed press the [OK] button, or to
continue without undoing the function press an LED button or the [CANCEL] or [CLEAR]
button.
●
The UNDO display will time-out after 15 seconds if no operation is performed in that time.
●
The Undo display will not appear when the [CLEAR] button is pressed (short or long press) to clear all
active notes from the layer.
Setting Parameters with the Jog Dial
[Edit menu] ∞
Copy this Block
Clesr this Block
Copy this Layer
∞
UNDO?
Parameter Settings
■ Edit Menu
Page 55
Page 55
Page 56
Page 57
Page 57
Page 58
54
TENORI-ON Manual