Yamaha TENORI-ON TNR-W Manual page 74

7
When the Current Block file has been loaded the display shown in step
appear, and playback of the Current Block file will begin.
Press the [OK] button in the status display when you want to stop playback.
● Save Current Block
Saves a Current Block file containing all active notes and settings such as voice, tempo, etc.,
for all layers in the current block to an SD Memory Card.
1
Insert an SD Memory Card that has sufficient free space for the file to be saved into the
TENORI-ON card slot.
2
Use the jog dial and [OK] button to navigate to the Current Block function menu as
follows:
"Main menu" ➝ "File menu" ➝ "Current Block"
3
Use the jog dial to highlight the "Save" function, then press the [OK] button.
4
The file name entry display will appear. A default file name will be provided, which you
can either use as-is or replace with a name of your own.
File name entry procedure is described in the Rename Song section on
●
File names can be up to 16 characters in length. The file extension will be added automatically.
Current Block File Name
Available Characters
Setting Parameters with the Jog Dial
Current Block Number
Block[01]: ∞
"0302E-BLOCK-02 "
Loading... CANCEL
Block[01]: ∞
Operation: Load
Block[01]: ∞
Operation: Save
Input File Name ∞
[0302E-BLOCK-02 ]
ABCDEFGHIJKLMNOPQRST
UVWXYZ-0123456789 ª§
Parameter Settings
■ File Menu
The name of the Current Block file
being loaded.
3
, above, will
Page 65.
Input Cursor
Set File Name
Backspace & Delete 1 Character
74
TENORI-ON Manual