Yamaha TENORI-ON TNR-W Manual page 71

5
Press the [OK] button to go to the file name entry display. The name of the currently
selected All Blocks file will be displayed, and you can enter a new file name as required.
File name entry procedure is described in the Rename Song section on
●
File names can be up to 16 characters in length. The file extension will be added automatically.
Current All Blocks File Name
Available Characters
6
When the file name has been entered as required use the jog dial to highlight the " § "
symbol in the lower right corner of the display and press the [OK] button.
"Executing ..." will appear on the display while the file is being renamed.
File data may be irreparably corrupted if you turn off the power or remove the SD Memory Card while the
"Executing..." display is showing.
●
If a file with the same name exists on the SD Memory Card an overwrite confirmation display like the
one shown below will appear.
●
Press the [OK] button if it's OK to overwrite the file. Press the [CANCEL] button (or use the jog dial to
select "CANCEL" on the LCD and then press the [OK] button) to cancel the operation and leave the
original file unaltered.
7
The display shown in step
● Delete All Blocks
Deletes a specified All Blocks file from an SD Memory Card.
1
Insert the SD Memory Card containing the file you want to delete into the TENORI-ON
card slot.
2
Use the jog dial and [OK] button to navigate to the All Blocks function menu as follows:
"Main menu" ➝ "File menu" ➝ "All Blocks"
3
Use the jog dial to highlight the "Delete" function, then press the [OK] button.
Setting Parameters with the Jog Dial
Input File Name ∞
[0302E-BLOCKS-02 ]
ABCDEFGHIJKLMNOPQRST
UVWXYZ-0123456789 ª§
Blocks: ∞
"1-BLOCKS1001-01 "
Already Exists!
Overwrite? OK
3
, above, will reappear when the operation has finished.
All Blocks ∞
Operation: Load
All Blocks ∞
Operation: Delete
Parameter Settings
■ File Menu
Page 65.
Input Cursor
Set File Name
Backspace & Delete 1 Character
71
TENORI-ON Manual